Mastering the Art of Wallpapering Corners with Patterned Wallpaper- A Step-by-Step Guide

How to Wallpaper a Corner with Patterned Wallpaper

Wallpapering a corner with patterned wallpaper can add a unique and stylish touch to any room. Whether you’re looking to create a focal point or simply want to add a touch of personality to your space, this guide will walk you through the process of wallpapering a corner with patterned wallpaper. From preparation to installation, we’ll cover all the essential steps to ensure a successful and beautiful outcome.

Preparation

Before you begin, it’s important to gather all the necessary materials and tools. Here’s a list of what you’ll need:

– Patterned wallpaper
– Paste
– Wallpaper brush
– Scissors
– Tape measure
– Level
– Utility knife
– Seam roller
– Ladder or step stool

Ensure that the surface you’re wallpapering is clean, dry, and smooth. If there are any imperfections, such as cracks or holes, fill them in with spackling compound and sand the area until smooth.

Measuring and Cutting

To ensure a seamless and professional-looking installation, it’s crucial to measure and cut the wallpaper accurately. Start by measuring the height and width of the corner you want to wallpaper. Add an extra inch to both measurements to account for any trimming or irregularities.

Next, lay out your patterned wallpaper on a flat surface and mark the measurements on the back. Use a utility knife to cut the wallpaper along the marked lines. If the wallpaper has a repeat pattern, make sure to align the pattern before cutting.

Applying Paste

Mix the wallpaper paste according to the manufacturer’s instructions. Apply a generous amount of paste to the back of the wallpaper using a wallpaper brush. Be sure to cover the entire surface, including the edges.

Installing the Wallpaper

Start by applying the wallpaper to the corner of the wall. Begin at the top and smooth the wallpaper down with your hands, ensuring there are no air bubbles or wrinkles. Use the level to check that the wallpaper is straight and aligned with the ceiling and floor.

Once the top edge is secure, move on to the sides. Work from the top down, smoothing out any bubbles or wrinkles as you go. Be sure to align the pattern on the adjacent walls if you’re wallpapering multiple corners.

Trimming and Finishing

After the wallpaper has dried, use a utility knife to trim any excess material from the edges of the corner. Be careful not to cut into the wallpaper itself. Smooth out any seams using a seam roller to ensure a seamless look.

Finally, inspect the corner to make sure it’s straight and the pattern is aligned. If everything looks good, you’ve successfully wallpapered a corner with patterned wallpaper!

Remember, practice makes perfect, so don’t be afraid to experiment with different patterns and techniques to find the look that best suits your space. Happy wallpapering!