How to Wallpaper Behind the Toilet: A Step-by-Step Guide
If you’re planning to refresh your bathroom with a new wallpaper, you might be wondering how to wallpaper behind the toilet. While it may seem like a daunting task, with the right approach and some essential tools, you can achieve a professional-looking finish. In this article, we’ll walk you through the step-by-step process of wallpapering behind the toilet, ensuring that your bathroom looks stylish and well-maintained.
Preparation is Key
Before you start wallpapering behind the toilet, it’s crucial to prepare the area properly. Here’s what you need to do:
1. Turn off the water supply: Before you begin, make sure to turn off the water supply to the toilet. This will prevent any unexpected leaks or damage to the wallpaper.
2. Remove the toilet: To wallpaper behind the toilet, you’ll need to remove it from the floor. Be sure to disconnect the water line, the tank, and the bowl before lifting it out.
3. Clean the area: Once the toilet is removed, clean the wall behind it thoroughly. Use a damp cloth to remove any dirt, mildew, or old wallpaper residue.
4. Allow the area to dry: Give the wall enough time to dry completely before you start wallpapering.
Tools and Materials
To wallpaper behind the toilet, you’ll need the following tools and materials:
1. Wallpaper: Choose a high-quality, moisture-resistant wallpaper that is suitable for a bathroom environment.
2. Paste: Use a wallpaper paste that is specifically designed for wet areas, such as bathrooms and kitchens.
3. Scissors: A sharp pair of scissors will make cutting the wallpaper easier and more precise.
4. Level: A level will help you ensure that the wallpaper is applied evenly and straight.
5. Paste brush: Use a wide, soft-bristled brush to apply the paste to the wallpaper.
6. Smoothing tool: A smoothing tool, such as a wallpaper brush or a plastic scraper, will help you smooth out any air bubbles and wrinkles in the wallpaper.
7. Trimmer: A utility knife or a wallpaper trimmer will be useful for cutting the wallpaper around the toilet’s base.
Step-by-Step Process
Now that you have all the necessary tools and materials, follow these steps to wallpaper behind the toilet:
1. Measure and cut the wallpaper: Measure the height and width of the wall behind the toilet and cut the wallpaper accordingly, leaving a little extra at the top and bottom for trimming.
2. Apply the paste: Using the paste brush, apply the wallpaper paste to the back of the wallpaper, starting from the top and working your way down. Be sure to apply the paste evenly and thoroughly.
3. Position the wallpaper: Carefully position the wallpaper on the wall, aligning it with the ceiling and floor. Use the level to ensure that it is straight.
4. Smooth out the wallpaper: Use the smoothing tool to smooth out any air bubbles and wrinkles in the wallpaper. Start from the center and work your way out to the edges.
5. Trim the excess wallpaper: Once the wallpaper is dry, use the trimmer to cut off any excess material around the toilet’s base and any other areas where the wallpaper overlaps.
6. Reinstall the toilet: After the wallpaper has dried completely, reinstall the toilet by reconnecting the water line, the tank, and the bowl.
By following these steps, you’ll be able to wallpaper behind the toilet with confidence. Remember to take your time and pay attention to detail to achieve the best results. Happy wallpapering!
