Where is the starter on a 2017 Dodge Journey? This is a common question among Dodge Journey owners who are experiencing starting issues with their vehicles. The starter is an essential component of the engine, responsible for turning the engine over and initiating the starting process. Knowing the location of the starter can be helpful when troubleshooting and performing maintenance tasks on your 2017 Dodge Journey.
The starter on a 2017 Dodge Journey is typically located on the driver’s side of the engine bay, close to the front of the vehicle. It is mounted to the engine block and connected to the battery via a set of electrical connections. To access the starter, you will need to remove some components to gain access to the area.
In the following sections, we will discuss the steps to locate the starter on a 2017 Dodge Journey, the components that may need to be removed to access the starter, and some common issues that may arise with the starter and how to address them.
Locating the Starter
To locate the starter on your 2017 Dodge Journey, follow these steps:
1. Park your vehicle on a flat, level surface and turn off the engine.
2. Open the hood and locate the battery. It is usually located in the engine compartment, near the firewall.
3. Look for the starter, which is usually mounted on the driver’s side of the engine bay, close to the front of the vehicle. It may be partially hidden by other components, such as the alternator or air filter box.
4. The starter is a large, box-like component with a solenoid and electrical connections. It is typically bolted to the engine block.
Removing Components to Access the Starter
To access the starter for maintenance or replacement, you may need to remove some components. Here are the steps to follow:
1. Disconnect the negative battery cable to prevent electrical shock.
2. Remove any components that are in the way, such as the alternator, air filter box, or other parts that may be obstructing access to the starter.
3. Locate the bolts that secure the starter to the engine block. There are usually two bolts holding the starter in place.
4. Loosen and remove the bolts, then carefully lift the starter out of the engine bay.
Common Starter Issues and Solutions
Starter issues can be caused by various factors, including worn-out brushes, a faulty solenoid, or a failing motor. Here are some common starter problems and potential solutions:
1. Difficulty starting the engine: This could be due to a weak battery, a failing starter motor, or a problem with the electrical connections. Check the battery’s condition and ensure the connections are clean and tight.
2. Clicking sound when trying to start the engine: This may indicate a failing solenoid or a problem with the electrical connections. Inspect the solenoid and connections, and replace them if necessary.
3. Starter not turning over: This could be due to a faulty starter motor or a problem with the electrical system. Check the motor and replace it if needed, and ensure the electrical connections are in good condition.
In conclusion, knowing where the starter is on a 2017 Dodge Journey can be beneficial when troubleshooting starting issues. By following the steps outlined in this article, you can locate the starter, remove components to access it, and address common problems that may arise. If you are not comfortable performing these tasks yourself, it is advisable to consult a professional mechanic for assistance.
