Overcoming ‘Can’t Copy from BD-R- External Alteration Error 0x800703ee’ – A Comprehensive Guide

Can’t copy from BD-R externally altered 0x800703ee error is a common issue faced by many users when trying to copy data from a Blu-ray Disc (BD-R) to their computer. This error message can be quite frustrating, especially when you are in a hurry to access the important files stored on the disc. In this article, we will discuss the possible causes of this error and provide some effective solutions to help you overcome it.

The 0x800703ee error typically occurs when the BD-R disc has been altered or modified in some way, either intentionally or unintentionally. This can happen due to various reasons, such as using an incompatible writing speed, applying unauthorized region codes, or attempting to burn the disc with an outdated or incorrect firmware. In some cases, the error might also be caused by a corrupted file system or hardware issues.

To resolve the “can’t copy from BD-R externally altered 0x800703ee error,” you can try the following solutions:

1. Check the BD-R disc: Ensure that the BD-R disc is not physically damaged or dirty. A dirty disc can prevent the drive from reading the data correctly. Clean the disc with a soft cloth and a gentle cleaning solution if necessary.

2. Update the firmware: Outdated firmware can cause compatibility issues with BD-R discs. Check the manufacturer’s website for the latest firmware update for your Blu-ray drive and install it if available.

3. Use the correct writing speed: Different BD-R discs have specific writing speed requirements. Check the specifications of your disc and use the recommended writing speed when burning the data to the disc.

4. Re-author the disc: If the BD-R disc has been externally altered, you may need to re-author the disc by burning it again with the correct settings. Use a trusted software application to create a new copy of the disc.

5. Format the disc: In some cases, formatting the BD-R disc can resolve the error. Open the disc in a compatible software application, and format the disc using the BD-RE format. Then, burn the data to the disc again.

6. Check for hardware issues: If none of the above solutions work, there might be a hardware issue with the Blu-ray drive. Try connecting the drive to another computer or consult the manufacturer for further assistance.

7. Use a different BD-R disc: If possible, try using a different BD-R disc to rule out any issues with the specific disc you are using.

By following these steps, you should be able to resolve the “can’t copy from BD-R externally altered 0x800703ee error” and successfully copy the data from your BD-R disc to your computer. Remember to always use high-quality BD-R discs and follow the manufacturer’s guidelines to avoid such errors in the future.