How to Safely Remove the Crown from a Citizen Watch- A Step-by-Step Guide

How to Remove Crown from Citizen Watch

If you’re a Citizen watch owner and need to remove the crown for any reason, whether it’s for cleaning, replacing the battery, or adjusting the time, it’s important to do it correctly to avoid damaging the watch. Here’s a step-by-step guide on how to remove the crown from your Citizen watch safely and effectively.

1. Identify the Type of Crown

Citizen watches come with different types of crowns, so it’s essential to identify which one you have. There are typically three types: a screw-down crown, a push/pull crown, and a simple crown. Each type has a different method of removal.

2. Position the Watch Properly

Hold the watch in your hand with the face facing up. Make sure the band is loose enough to allow for easy access to the crown.

3. Remove the Screw-Down Crown

If you have a screw-down crown, locate the small screw on the side of the case. Use a small flathead screwdriver to unscrew the screw and remove it. Once the screw is out, gently pull the crown outwards to release it from the watch.

4. Remove the Push/Pull Crown

For a push/pull crown, simply press the crown down and pull it outwards. You may need to twist the crown slightly as you pull it out.

5. Remove the Simple Crown

If your Citizen watch has a simple crown, it’s usually attached with a spring bar. Locate the spring bar tool or use a small flathead screwdriver to push the spring bar out. Once the spring bar is out, the crown should come off easily.

6. Handle with Care

Once the crown is removed, be careful not to drop it or expose the movement to dirt or debris. If you’re cleaning the watch, use a soft cloth and mild soap to gently wipe down the exterior. Avoid using harsh chemicals or abrasive materials.

7. Reassemble the Watch

After you’ve completed the necessary work on the watch, reassemble it by reversing the steps you took to remove the crown. Make sure to replace any screws or spring bars properly.

8. Test the Watch

Once the crown is securely back in place, wind the watch and test it to ensure it’s functioning correctly. If the watch is still not working as expected, you may need to take it to a professional watchmaker for further assistance.

By following these steps, you can safely and effectively remove the crown from your Citizen watch. Remember to handle the watch with care and take it to a professional if you’re unsure about any of the steps or if the watch is not working properly after reassembly.